Installation guide
Installing a retractable ceiling fan light.
The blades fold away, so the installation has one extra check that a normal fan does not: the space the blades need while they unfold.
A retractable fan light is a flush ceiling fixture when it is off and a working ceiling fan when it is on. The blades are real — acrylic blades that unfold from the housing — so the electrical installation is the same as any ceiling fan, with one addition: the sweep has to be clear while the blades open.
Clearance for the blade sweep
Check the open diameter, not the closed one. A 42 inch model needs a clear circle of about that diameter at blade height, so pendants, sprinkler heads, air-conditioning diffusers and high-level cabinetry have to sit outside that circle. In a bedroom, the usual conflict is the wardrobe run rather than the ceiling itself.
The other clearance to check is head height under the blades on a low ceiling. A retractable body is flush, which helps, but the blades still sweep below the housing when running.
Mounting and ceiling construction
The fixture mounts to a ceiling with a suitable fixing for its weight and for the vibration of a running fan — a concrete slab with anchors, or a timber joist through a ceiling rose. Suspended grid ceilings need a brace above the grid; the tile alone is not a fixing point.
On a sloped ceiling, confirm the mounting angle with us before ordering. A flush body needs a flat mounting surface.
Wiring, remote and pairing
The body is wired to a permanent live and neutral with earth where the market requires it, and control is by remote (or wall control where specified). Pair the remote on site after the supply is stable, and label the pairing procedure inside the consumer unit or the room file — hotel and serviced-apartment projects lose more time to a lost pairing instruction than to any other issue.
Light kit and service access
The LED module and driver are serviceable from below on the models in this range, which is what makes the product workable for a hotel or a rental portfolio: a failed driver does not mean removing the fixture. Keep one spare driver per project per model.
First-run checks
Run the fan through every speed, check the blades unfold and retract cleanly without contacting the housing, confirm the light switches through its colour temperatures, and check for wobble at the top speed. Any wobble at installation is usually mounting, not balance; the factory balance is set on a dynamic test before packing.
Checklist
- Clear circle equal to the open blade diameter at blade height
- Ceiling fixing rated for the fixture weight and fan vibration
- Flat mounting surface, or the slope angle confirmed before ordering
- Permanent live, neutral and earth as the destination market requires
- Remote paired and the pairing procedure filed on site
- One spare driver per model kept on the project
More buying guides
Enquiry
Send a model, a quantity and a destination.
That is enough for a real quotation. Catalog prices are a starting range, not a final offer.
Reply within one working day
Enquiries are answered by the export desk in Zhongshan, not an outsourced inbox.
Quoted on FOB terms
USD, export packing included, with the freight option that matches your destination.
Documents before you commit
Test reports, certificate files and packing dimensions are sent with the quotation.