Selection guide
Ceiling fan size guide: blade span against room size.
Most wrong fan orders are a diameter mistake, not a motor mistake. This is the sizing logic we use when a buyer sends a floor plan instead of a model number.
Blade span is chosen from the floor area the fan has to move air through, and then corrected for ceiling height. A fan that is too small runs at full speed and still feels weak; a fan that is too large for the room moves more air than the space needs and is harder to place around light fittings.
The table below is the starting point we quote from. It is the sizing guidance commonly used in the industry, not a building-code requirement — a room with a low ceiling, a lot of glazing or an open side will need the next size up or a second fan.
| Floor area | Blade span | Typical room |
|---|---|---|
| up to 75 sq ft (7 m²) | 29 – 36 in | Walk-in closet, small study, bathroom |
| 76 – 144 sq ft (7 – 13 m²) | 36 – 42 in | Bedroom, small kitchen |
| 144 – 225 sq ft (13 – 21 m²) | 44 – 50 in | Standard bedroom, dining room |
| 225 – 400 sq ft (21 – 37 m²) | 50 – 54 in | Living room, master bedroom |
| over 400 sq ft (37 m²) | 56 in and above, or two fans | Open living area, workshop, hall |
Correct the span for ceiling height
A standard 8 to 9 ft ceiling takes a flush or hugger mount: the fan body sits close to the ceiling, which keeps the blades out of head height. From about 9 ft upward a downrod is used, and the rule we work to is roughly 6 in of downrod for the first foot of extra height, then longer rods for double-height rooms.
Downrods matter for airflow as well as clearance. A fan mounted too close to a high ceiling re-circulates the same air; dropping the blades into the occupied zone is what actually makes the room feel cooler.
Diameters we tool for
The catalogue covers 42, 48, 52, 56, 60 and 72 inch bodies. The 42 to 52 inch range is the residential core; 56 to 72 inch is the industrial and commercial range, where the fan is specified for air movement across a large plan rather than for a bedroom.
Blade count is a separate decision from span. Three and five blade sets are the residential standard, eight-blade sets are used on the large-diameter models, and the retractable line uses folding acrylic blades that retract into the housing.
Two fans instead of one oversized fan
Long rooms, L-shaped living areas and open-plan retail floors usually work better with two correctly sized fans than with one 72 inch fan at the end of the room. Air movement drops with distance, so a second fan placed on the same switching circuit gives more even comfort for a similar total cost.
If the ceiling is broken up by beams or a bulkhead, treat each bay as its own room for sizing purposes.
What to send with a sizing enquiry
Floor area or a plan with dimensions, ceiling height and ceiling construction, the room use (bedroom, hotel room, workshop, covered terrace), and the destination market. With those four answers we shortlist a diameter and a motor and quote FOB, instead of asking you to choose a model you have not seen.
Checklist
- Floor area per room, not the whole floor plate
- Ceiling height at the mounting point
- Ceiling construction: concrete, timber joist, suspended grid
- Whether the fan shares the ceiling with a light fitting or sprinkler
- Destination market, because it decides the certification set
More buying guides
Enquiry
Send a model, a quantity and a destination.
That is enough for a real quotation. Catalog prices are a starting range, not a final offer.
Reply within one working day
Enquiries are answered by the export desk in Zhongshan, not an outsourced inbox.
Quoted on FOB terms
USD, export packing included, with the freight option that matches your destination.
Documents before you commit
Test reports, certificate files and packing dimensions are sent with the quotation.